Category
Product Detail
Inverted Pressure Balance Lubricated Plug Valve
ANSI inverted pressure balance lubricated plug valve is applicable to the cutting and connection of pipelines medium that are used in various industries such as petroleum, chemical industry, pharmacy, chemical fertilizer, power industry etc under nominal pressure of CLASS150~1500LBS, and working...
- category :Plug Valve
- Email :teji@teji-valve.com
- Phone :+86-577-67354000
- fax :+86-577-67354001
ANSI inverted pressure balance lubricated plug valve is applicable to the cutting and connection of pipelines medium that are used in various industries such as petroleum, chemical
industry, pharmacy, chemical fertilizer, power industry etc under nominal pressure of CL ASS150~1500L BS, and working temperature of -29~550 °C.
2. It has the structure of fip-chip balanceable pressure and light on/off operation.
3. An oil groove is set between valve body and seal surface, which may infuse the seal grease to increase the seal capability.
4. The materials of the parts and sizes of flanges can be reasonably configured according the actual operation condition of the requirements of the customer, so as to meet the
industry, pharmacy, chemical fertilizer, power industry etc under nominal pressure of CL ASS150~1500L BS, and working temperature of -29~550 °C.
MAIN STRUCTURAL FEATURES
1. The product has reasonable structure, reliable sealing, excellent performance and beautiful appearance.2. It has the structure of fip-chip balanceable pressure and light on/off operation.
3. An oil groove is set between valve body and seal surface, which may infuse the seal grease to increase the seal capability.
4. The materials of the parts and sizes of flanges can be reasonably configured according the actual operation condition of the requirements of the customer, so as to meet the
various needs of engineering.
TECHNICAL SPECIFICASTION
|
Structure formation |
BC |
|
Driving manner |
Manual, electric actuated |
|
Design standard |
API 599, API 6D |
|
Face to face |
ASME B16.10 |
|
Flange ends |
ASME B16.5 |
|
Test&inspection |
API 598, API 6D |
|
Nominal pressure LB |
Shell test MPa |
Sealing test MPa |
Suitable temp.°C |
Suitable medium |
| 150 | 3.0 | 2.2 |
≤300°C/350°C |
Water oil&gas. |
| 300 | 7.5 | 5.5 | ||
| 600 | 15.0 | 11.0 | ||
| 900 | 22.5 | 16.5 | ||
| 1500 | 37.5 | 27.5 | ||
| 2500 | 63.0 | 46.2 |
Welcome to our website. If you have any requests or suggestions,please feel free to email us at teji@teji-valve.com or use the following enquiry form. Please allow us to provide you with the best service.
